LOW VOLTAGE FROST PROTECTION

For any frost protection kit ordered between 11th December 2011 and 30th January 2012 you will receive a free of charge ambient air thermostat worth £41.00 and your order will qualify for free delivery.

Loheat's standard low voltage pipe-trace heating kits provide the most efficient method of protection against frost in any run of water piping up to one inch bore. The heating elements are designed for simple fitting to existing runs making it easy to protect all pipe work around the farm and in the parlour with minimum effort.

A very low voltage is supplied by a Loheat fully enclosed transformer which can be operated continuously to provide heating a few degrees above freezing. The low voltage system is very safe and reliable and offers a long working life. Standard kits provide up to 52.5m of frost protection on one inch bore pipes but longer runs for larger pipes can be supplied to order.

• Complete kits - easy to install

• Safe and reliable - operates on very low voltage

• Suitable for copper, steel, alkathene or MDPE pipes up to 1"

• Kits built for long life

• Low power consumption - only 10 watts per metre run

• Safe for use in buildings with children and animals

• Special kits available for longer lengths or larger diameter pipes

• Automatic operation by optional frost stat

• FP20 is suitable for pipe runs from 10 - 20m

• FP30 is suitable for pipe runs from 20 - 30m 

• FP40 is suitable for pipe runs from 30 - 40m

• FP50 is suitable for pipe runs from 40 - 50m

click on buy for current pricing

1. If the trace heating passes through partitions of wood or other combustible material, it must be completely surrounded by a rigid non-combustible layer to prevent fire hazard
2. Adjacent passes of heating element must always be suitably spaced one from the other to prevent local overheating with possible damage to the insulation and eventual short circuits.
3. The element should be cut to suit the length of pipe and the voltage adjusted in the transformer case, as per the tapping sheet on underside of the transformer lid.
4. The pipes must always be lagged after application with non-combustible material.