The Loheat 3000 range of water heaters
was introduced 7 years ago, since when Loheat have been
continuously developing these products. All these developments
have been incorporated into the range of copper cylinder heaters
and option packs in production now. Be assured all key
dimensions, plumbing and electric locations remain unchanged.
We have 19 years experience in the
sales and installation of these water heaters, and have
absolutely no hesitation in recommending them to you.
To maintain correct water temperatures
it is important to prevent entry of cold water into the heater
during the cleaning process. Loheat offers several different
systems for this purpose. All heaters are open topped for easy
cleaning and descaling.
All models in the range have a large
19 litre header tank with full size brass ball valve, inlet
service valve and insulated aluminium lid. All heaters from
160-680 litres have two 28mm outlets, with an extra half capacity
outlet on all models 295 litres and above.
The standard model has a manually
operated ball valve to prevent cold water entry when drawing off
hot water. A rod thermostat controls the temperature and the
analogue thermometer reads it.
All heaters have a pilot light fitted
on the front panel indicating power on.
As standard, Loheat Dairy Water
Heaters are supplied as copper tanks with a plastic coated
galvanised steel casing.
These water heaters are very easy to
install, and are supplied with full installation instructions,
although any mains electrical work should be tested and
inspected by a competent electrician.
Prices start from just £714.00 + vat.
For hard water areas, or if you prefer
the look, all heaters can be supplied with stainless steel tanks
and casings.
|
